Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Registered Capital:
3000000 USD
Plant Area:
>2000 square meters
Management System Certification:
ISO 9001
Average Lead Time:
Peak season lead time: one month
Off season lead time: within 15 workdays
OEM/ODM Service

Diesel Engine, Water Cooled Deutz Diesel Engine, Water Cooled Diesel Engine manufacturer / supplier in China, offering Water Cooled Deutz Diesel Engine (TD226B-6D), 2900 Rpm Centrifugal Fire Fighting Water Pump with Diesel Engine or Motor (Normal or NFPA20 Standard), Movable Centrifugal Water Pump Unit for Irrgation and Drainage and so on.

Gold Member Since 2007
Audited Supplier

Water Cooled Deutz Diesel Engine (TD226B-6D)

Min. Order: 1 Piece
Port: Shanghai, China
Production Capacity: 48000PCS/Year
Payment Terms: L/C, T/T, D/P
Ignition Mode: Compression-Ignition
Speed: Speed
Cooling Cylinder: Water-Cooled
Intake Pressure Impulse: Naturally Aspirated
Piston Movement: Reciprocating
Fuel: Diesel, Diesel Engine

You Might Also Like


Basic Info.

Model NO.
Number of Strokes
Cylinder Arrangement Form
in Line
Number of Cylinders
Multi-Cylinder Machines
as Per Model
as Per Model
Transport Package
Wooden Case
HS Code
226B Series Diesel Engine
We introduce the licence and production line from German Deutz engine company,
This engine has good performance in strong power, lower fuel consumption, high
Reliability. This engine is suitable for water pump use ( with PTO), and generator
Set use, and other purposes.it is widely welcome in overseas market Like South
American, Middle east, Africa , Australia and etc.
Basic data      
WEICHAI engine model     D226B-3DTD226B-3DTD226B-4DTD226B-6DTBD226B-6D
Number of Cylinders 33466
Engine Displacement L3.1173.1174.1566.2346.234
Type in line,four stroke,direct injection,wet cylinder liner 
Firing order 1-3-21-3-21-3-4-21-5-3-6-2-41-5-3-6-2-4
Compression ratio 16.415.515.515.515.5
Aspiration NaturalTurbochargedTurbochargedTurbochargedTurbocharged
Crankshaft rotated direction(Face to flywheel) Anti-colckwise
Staring Methord Electronic Motor(DC24V or 12V)
cold start performancewithout cold start aidºC-10-10-10-10-10
with cold start aidºC-35-35-35-35-35
Permitted gradient longitudinal /cross°25/3025/3030/4020/4520/45
Engine onlyDry weight   kg495505545714735
Wet weight   kg505.5515.5559.5735750
Engine with cooling packageDry weight   kg520530570760775
Wet weight   kg530540585781790
Prime Power kW365070105135
Speed at Prime Power r/min18001800180018001800
Standby Power kW4055.077116149
Speed at Standby Power r/min18001800180018001800
Fan Power ConsumptionkW22244
Mean piston speed at rated speedm/s7.
Torque at Prime PowerN.m191265.28371.39557.08716.25
Standby PowerN.m210.1291.81408.53612.79787.88
Effective mean presure atPrime PowerkPa769.971069.401122.871122.871443.70
Standby PowerkPa846.971176.341235.161235.161588.07
Max combustion pressureMPa≤18.5
The lowest idle speedr/min800±50750±50750±50750±50750±50
Steady Governing Rate Mechanical type≤5%,Elcctronic≤1.5%
Lubrication System      
lubricating oil  consumptiong/kW?h0.650.670.660.670.67
Oil system capacity including filters 889.751414
oil sump capacity 7.257.2591313
Oil change intervals/specificationsh250
Oil pressure atRated speedkPa300-500
Idle speed kPa≥100
Max permitted oil temperatureºC≤120
Oil pump type gear pump
Oil filter type spiral paper element
Oil cooler type Round plate type
Oil grade SAE 15W-40 for temp above (-15 degC). SAE 5W-30 for temp below    (-15degC).CD/CE/CF class oilRound plate type
Fuel System      
Fuel Pump, Model A Type or AD typeA Type or AD typeEP9 Type or P7100 typeEP9 Type or P7100 typeEP9 Type or P7100 type
Type of Governor: Mechanical / Electronic optionaloptionaloptionaloptionaloptional
Steady Governing Rate Mechanical type≤5%,Elcctronic≤1.5%
Fuel consumption  See test data or charactertic curve
Fuel feed pump type plunger type
Fuel filter type spiral paper element
Injection timing(B.T.D.C)° 20.5±0.520.5±0.518±0.518±0.518±0.5
Injector type multi-hole,valve needle 
Injector opening pressueMPa2222222222
Solenoid, Make & Model 1756ES1756ES1756ES1756ES1756ES
Voltage24 or 1224 or 1224 or 122424
Pulling Current When voltage is 24V ,≤25A.,When voltage is 12V ,≤50A
Holding Current When voltage is 24V ,≤0.6A.,When voltage is 12V ,≤1.2A
Intake and Exhaust system      
Air consumption atPrime Powerkg/h156229304421421
Standard Powerkg/h/240312440440
Max allowable Air intake restrictionkPa≤3
Max Environmental temperatureºC≤45
Air filter type spiral paper element
Max exhaust gas temperature after turbineºC≤600≤550≤550≤550≤550
Max allowable back pressure in exhaust linekPa≤7
Exhaust gas flow atPrime Powerkg/h163238318441441
Standard Powerkg/h/251326462462
Cooling system      
Max. Top tank temperatureºC≤103
Heat rejection radiation from engine at Rated  PowekW/8101717
Heat rejection to coolant at Rated PowerkW/15183535
Radiator ambientºC≤45
Recommended coolant  See Operatin Manual
Radiator cooling system type closed circuit
Radiation area of ratiatiorm^21820203030
Radiator core thickness   
fan diametermmΦ466Φ466Φ466Φ540Φ540
fan power consumptionkW22244
fan flowm^3/min172172172220220
coolant capacityL15.715.71927.627.6
coolant pump type Centrifugal 
Water Flow in Major Circulationm^3/h/
Max external coolant system restrictionkPa≤12
ThermostatType wax type
strat to openºC75
fully open 90
Electrical system and others      
Engine Driven Charging AlternatorMaker & Model Prestolite Company
Type Three-phase AC,commutated and voltage regulated
System VoltageV28V28V28V28V28V
Charging AmperesA27A27A27A27A27A
Starter SystemMaker, Model PrestolitePrestolitePrestolitePrestolitePrestolite
Type DC,selfexcitation 
Voltage 24V or 12V24V or 12V24V or 12V24V 24V 
Rated Power 4kW6kW6kW
Starting Current 800~900A800~900A800~900A800~900A800~900A
Solenoid& Model incorporated with starter
Relay,  & Model incorporated with starter
Protection Threshold SettingLow Oil Pressure 0.12MPa(When engine speed ≥650r/min)
High Engine TemperatureºC9595959595
High Oil TemperatureºC105105105105105
provisions on the flywheel housing for the installation of magnetic pickup It is recommended to install the magnetic pichup at  the flywheel gear ring with 0.4~0.8mm clearance between the pickup and the tip of the tooth
switches and sensors installation location See the Engine Assembly Drawing
the Electrical drawing See the Engine Electrical Drawing
Flywheel house stadard SAE3SAE3SAE3SAE1SAE1
Flywheel type stadard SAE11.5SAE11.5SAE11.5SAE11.5SAE11.5
Center of Gravity Location see the engine outline drawingsee the engine outline drawingsee the engine outline drawingsee the engine outline drawingsee the engine outline drawing

Send your message to this supplier

avatar Mr. Yang Bowei

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now