ISO Horizontal End Suction Centrifugal Water Pump (50X32-200)

Product Description

Brief Introduction
ISO is used for handling clear water or the liquids similar to the water physically and chemically finding the
applications for water feed and supply service in mine, plants and towns, air-conditioning, extinguishing and irrigation.
In spite of the same specification, the pump's performances vary with the diameter of the impeller. (Indicated with
the block letters A, B and C in the end of the designation of the type.)
The pump is simple in structure, reliable in performances, small in size, low in power consumption, convenient in
maintenance and of good cavitation proof.
ISO has 29 specifications with the shaft in four sizes, suitable for various handling duties. For the pump with a
same specification, the components, such as shaft, bearings, shaft sleeve, shaft seal and the fasteners of impeller are exchangeable. In addition, only five types of bearing brackets are applied to the whole series.

SPECIFICATION EXAMPLES:
Max. Capacity: 250L/s
Max. Head: 160m
Max. Speed: 3500r/min.(When using the power of 60Hz, the dia. of impeller is reduced.)
Max. Working Temperature: 105ºC
Shaft Seal: mechanical seal
Min. Working Temperature: -10 ºC
Applicable Standard: ISO2858